Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Cap & Crown for Kingwood Homeowners
A missing or rusted-out cap is the quiet reason water gets into a Kingwood chimney. Rain runs straight down an open flue, soaks the smoke chamber, and works at the mortar crown until cracks open and the whole top of the chimney starts to fail. We see it often in the older brick homes set back under the pines, where shade keeps a chimney damp long after a storm passes.

Our technicians have up to 8 years of experience fitting caps and rebuilding crowns, and every job starts with a camera inspection so you can see the damage for yourself before any work is agreed. We use the materials the industry trusts, including Gelco and Copperfield caps, and we book most work same-day. One call, complete chimney care. Call (844) 960-2344 to set up a free estimate.
Key Takeaways
- A properly fitted cap keeps rain, birds, and debris out of the flue; a sound crown keeps water from eating the chimney top.
- We handle cap installation, replacement, crown repair, crown coating, multi-flue caps, and custom caps as one company.
- Nothing is recommended without camera evidence you can look at yourself.
- Estimates are free, and the written estimate sets the final price.
What Our Chimney Cap & Crown Service Includes
Caps and crowns sit at the very top of your chimney, and they take the worst of the weather. They also protect everything below them. Here is what each part of the job covers and when it’s the right call for your home.
Cap Installation
A chimney cap is the metal hood and mesh screen that sits over the top of the flue, letting smoke out while keeping rain, leaves, squirrels, and birds from getting in. You need one if your chimney has never had a cap, or if the flue is open to the sky when you look down from the roof. We measure the flue opening, match the cap to the flue size and shape, and fit it so it sheds water away from the crown rather than into the flue.
Cap Replacement
Replacement is for caps that are rusted through, bent, or missing mesh panels after a storm. A damaged cap stops doing its job quietly: rain gets in, and small animals find the gap before you notice. We take the old cap off, check the flue top for damage, and fit a new cap sized correctly to the flue. If a previous cap was the wrong size, that gets corrected at the same visit.
Crown Repair
The crown is the sloped concrete or mortar surface at the top of the chimney that pushes water away from the brick below. You need repair when it’s cracked, crumbling, or pulling away from the flue, which is common on chimneys that have gone years without attention. We remove the failed sections, rebuild the crown with a proper slope and overhang, and seal the bond to the flue so water can’t track back in.
Crown Coating
Crown coating is a protective layer applied over a crown that is still structurally sound but showing surface wear. It’s the right option when the crown hasn’t cracked through yet but the surface has started to chalk, pit, or absorb water. We clean the crown back to sound material and apply a flexible coating that moves with the masonry instead of cracking off it. Coating extends the life of a crown that doesn’t need full replacement, and it’s a good way to avoid paying for a rebuild you don’t need.
Multi-Flue Cap
A multi-flue cap is a single unit that covers two or more flues on one chimney, which is common on larger Kingwood homes with a fireplace plus furnace or water heater flues. You need one when separate single caps leave gaps between them, letting water run onto the crown between the flues. We build the cap to the exact footprint of your chimney top so every flue is covered and the crown beneath stays dry.
Custom Cap
Custom caps are for chimney tops that standard sizes don’t fit: oversized masonry flues, unusual shapes, or chimneys where the crown profile makes an off-the-shelf cap sit wrong. You need one when a stock cap would need to be forced into place or would leave part of the flue exposed. We take measurements on site, have the cap made to fit, and install it so it protects the flue and the crown together. Working with brands like Olympia Chimney and Famco lets us match the right cap to the flue rather than compromise with whatever happens to be on hand.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Cap & Crown
We work with a range of professional-grade chimney brands, and knowing how each one performs in real conditions matters when we’re recommending a cap or crown for your home. Gelco products hold up well in the humid stretches Kingwood gets through summer, and we know which of their caps suit a standard masonry flue versus a taller chase. Olympia Chimney caps are a solid choice where you want a clean fit over a single flue with good airflow, and we fit them to the exact opening rather than trimming mesh to make a size work.
Famco and Copperfield both give us options for homes that need more than a basic cap, including multi-flue setups and stainless work that stands up to Gulf-region rain. We don’t sell one brand over another; we pick the material that fits your chimney, your budget, and how much weather it faces. Whether you have a Gelco cap that’s rusted at the seams or a Copperfield multi-flue unit that lost a screen panel, we can help. And if you have no cap at all, we’ll help you choose one that will last.
Signs You Need Chimney Cap & Crown Right Now
Some cap and crown problems show up inside the house before you ever climb a ladder. Watch for these signals:
- Water stains on the ceiling or firebox walls. Brown streaks or damp patches near the chimney usually mean rain is getting past a failed cap or a cracked crown. Left alone, that moisture reaches the smoke chamber and the framing around the chimney.
- Crumbling mortar or brick spalling at the chimney top. When the crown cracks, water soaks into the brick below and pushes it apart when it dries. Crumbling mortar at the top of the chimney is a sign the crown has stopped doing its job.
- Birds, squirrels, or debris in the firebox. An open or damaged flue is an easy way in for animals and a place for leaves to collect. Nesting material inside a flue is a fire risk the first time you light a fire.
- A cap that’s rusted, bent, or missing mesh. Rusted seams and torn screens mean the cap has stopped protecting the flue. A storm can lift a loose cap entirely, which leaves the flue wide open.
- Draft problems and smoky fires. A cap that’s the wrong size or blocked with debris can cut airflow and push smoke back into the room. If your fireplace has started smoking when it didn’t before, the cap is one of the first things we check.
Our Chimney Cap & Crown Process – Step by Step
We keep the process simple so you always know what’s happening and why.

- 1
Inspection first. We start with a camera inspection of the flue and a close look at the crown from the roof, so we can see cracks, rust, or gaps that aren’t visible from the ground. You get photos of what we find. Nothing gets recommended before that.
- 2
Written findings and estimate. We explain what we found in plain terms, including whether any of it can safely wait. You get a written estimate with the work and materials spelled out before anything is booked.
- 3
Material and fit selection. Once you approve, we match the cap or crown material to your chimney, your climate, and your budget. That’s where our access to DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield matters: the right product for the flue, not a one-size-fits-all choice.
- 4
The work itself. Cap installation and replacement are usually quick. Crown repair means removing failed material, rebuilding the slope, and sealing it properly. Crown coating means cleaning back to sound masonry and applying a flexible coating. We protect the roof and clean up after ourselves.
- 5
Final check and photo report. We test the fit, confirm the flue draws correctly, and give you photos of the finished work. If there’s anything to watch over the next year, we’ll tell you then, not after the fact.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Kingwood?
Chimney cap and crown work in Kingwood typically runs from about $250 for a basic single-flue cap installation up to around $1,800 for a full crown rebuild on a large or multi-flue chimney. Most homes land somewhere in that range, and the written estimate always sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Single-flue cap installation | $250 – $550 |
| Cap replacement (existing cap removed) | $275 – $600 |
| Multi-flue or custom cap | $450 – $1,100 |
| Crown coating | $350 – $750 |
| Crown repair or rebuild | $600 – $1,800 |
What moves the price: the number of flues, whether the crown is a simple repair or a full rebuild, the material you choose, and how much access the roof allows. A steep or complex roofline takes more time than a straightforward one. Custom caps cost more than stock sizes because they’re measured and made to fit.
How to avoid overpaying: get the estimate in writing before work starts, and ask for photos of any damage. If someone tells you the whole chimney needs rebuilding when you called about a cracked crown, ask to see the camera footage. We tell you what your chimney actually needs, and we’ll say plainly when crown coating will do the job instead of a rebuild. Estimates are free. Call (844) 960-2344 for an exact quote.
Chimney Cap & Crown Near Kingwood – Our Service Area
We handle chimney cap & crown work across Kingwood and the surrounding communities, including Humble, Atascocita, Spring, Porter Heights, Woodbranch, Lake Houston, Greenspoint, Dayton, and Crosby. Homes nearer Kingwood usually get booked quickly, and we schedule the work around your day. If you’re in one of these areas and your cap is missing or your crown is cracking, call us and we’ll find a time that works. We also handle chimney cap & crown and chimney cap & crown calls for neighbors in those towns.
Serving Kingwood, TX – Our Local Coverage Area
We serve Kingwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Cap & Crown in Kingwood
A chimney cap is the metal hood and screen that covers the top of the flue, and the crown is the sloped concrete surface at the top of the chimney that sheds water away from the brick. You need both because they protect different parts of the chimney: the cap keeps rain and animals out of the flue, and the crown keeps water from soaking into the masonry below it. A chimney with a good cap but a cracked crown will still take on water at the top. Call (844) 960-2344 to have both checked in one visit.
Most cap installations and replacements take a couple of hours, while a full crown rebuild can run most of a day depending on the size of the chimney and the materials. Crown coating is usually quicker than a rebuild because there’s less demolition involved. We’ll tell you the expected time when we give you the estimate, so you can plan around it.
Cap installation typically runs $250 – $550 for a single flue, and crown repair or rebuild usually falls between $600 and $1,800 depending on the size of the chimney and how much of the crown needs replacing. Multi-flue and custom caps cost more because they’re measured and made to fit. The written estimate sets the final price, and estimates are free. Call (844) 960-2344 for an exact quote.
Yes. We work with Olympia Chimney, Gelco, Famco, and Copperfield caps and related chimney components, along with DuraFlex and HeatShield materials for the rest of the system. That breadth matters when a cap needs to fit an unusual flue or a brand’s sizing doesn’t match what’s on your chimney. We’ll tell you honestly what the right fit is, even if it means a different product than the one you have now.
We book most cap and crown work same-day when the schedule allows, and we’ll give you a clear time when you call. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday. Call (844) 960-2344 and we’ll get you on the schedule.
We stand behind the work we do and the materials we install, and any warranty terms are put in writing with your estimate so there’s no confusion later. Ask about coverage for your specific cap or crown when we quote the job. The same written estimate that sets your price also spells out what’s covered. Call (844) 960-2344 to get the details for your chimney.
Clear access to the fireplace and hearth inside, and make sure we can reach the roof safely from outside, is really all most jobs need. Move anything breakable away from the fireplace opening, and let us know in advance if there’s a gate code or a dog in the yard. We handle the rest, including protecting the roof and cleaning up when we’re done.
Schedule Your Chimney Cap & Crown Service in Kingwood Today
If your cap is missing, rusted, or your crown is cracking, it’s worth getting ahead of it before the next round of rain finds the gap. We’ll inspect the chimney, show you what we find, and give you a written estimate with no obligation. Call (844) 960-2344. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Kingwood.